Wet pan mill is the most commonly used grinding equipment in small and medium-sized mineral processing plants and pulverizer plants. In Sudan, at least 85% of gold miners use Wet pan mills in the gold separation process. The most important thing is that our customers can get pure gold directly after the material is processed by Wet pan mill. So how to improve the service life of the Wet pan mill and bring better economic benefits to customers?
Wet pan mill is the most commonly used grinding equipment in small and medium-sized mineral processing plants and pulverizer plants. In Sudan, at least 85% of gold miners use Wet pan mills in the gold separation process. The most important thing is that our customers can get pure gold directly after the material is processed by Wet pan mill. So how to improve the service life of the Wet pan mill and bring better e conomic benefits to customers?
1、Start the wet pan mill and run it idle for 3-5 minutes.
After confirming that all parts are normal, the material can be fed. Mine must be fed in strict accordance with the prescribed dosage. It is strictly forbidden to overload the wet mill.
2、The input material must be screened when feeding
When feeding, the material must be screened to prevent iron filings and hard metal debris from entering and damaging the wet disc grinding device.
3、Remember to clean the wet pan mill usually.
The cleaning work of wet gold grinding machine is very important. Too much debris or dust on the surface will directly affect the efficiency of wet disc grinding equipment.
4、Add lubricating oil to ensure normal operation of bearings
The shaft bears all the load of the wet disc gold grinder, so good lubrication has a great relationship with the life of the bearing, which directly affects the service life and operating rate of the machine. Therefore, when cleaning the machine, lubricating oil can be added to the wet disc grinder to ensure the normal operation of the gears and bearings. In addition, the injected lubricating oil must be clean and the sealing must be good.
5、Bolts must beinspected frequently
The newly installed fastening bolts of the outer ring and the inner core of the wet disc grinder are easy to loose and must be checked frequently.
6、If there is abnormal noise or abnormal bearing speed, stop operation immediately
Wet pan mills are used to process minerals. The hardness of minerals is very high, so internal friction is normal. However, in the case of serious wear and tear, if the parts are not replaced in time, serious losses will be caused. Therefore, when the wet mill is working, if there is abnormal noise or abnormal bearing speed, it is necessary to stop the operation immediately, and then proceed to the next step after troubleshooting. This protects the Wet pan mill from serious damage and keeps workers safe.
7、Improve the wear resistance of the machine, improve the structure of the connecting part
The main part of the wet pan mill, the support frame, is easy to wear.
Since the structure of the Wet pan mill is open, inorganic particles and dust from refractory materials or the surrounding environment are easy to adhere to the joint surface of the square iron and the support frame slider, which will inevitably lead to rapid wear of the joint surface. The square iron is easy to replace after wear and tear.
However, if a new support frame is replaced, not only the workload is large, the construction period is long, and the cost is high. Therefore, in order to fundamentally solve this problem and improve the service life of the Wet pan mill, the first is to improve the wear resistance of the guide rail surface of the support frame of the Wet pan mill, and the second is to improve the connection between the square iron and the slideway in the support frame. structure.