crusher machine

BTMA–How to improve the output capacity of the jaw crusher?

The production capacity of the jaw crusher is related to many factors such as the particle size and hardness of the material, the type and size of the crusher, and the operation mode of the crusher, which leads to the reduction of the production capacity of the equipment and the reduction of the production efficiency of the crusher. How to improve What about the productivity of jaw crushers? The following tells you how to increase the production capacity of jaw crusher.

 

1、The feeding is uniform, and the feeding amount is strictly controlled.

 

Generally speaking, the larger the feed amount, the longer the crushing time of the jaw crusher, and the wear of the machine will also increase, which are all factors that affect the production capacity of the jaw crusher. Therefore, it is recommended that the user must strictly control the materials during the production and operation process. Do not let the non-crushed materials such as materials with excessive particle size, excellent hardness, materials with high water content or iron blocks enter the crushing cavity, and must also keep the feeding uniform. .

 

2、Adjust the size of the discharge port in time

 

Adjust the size of the discharge opening in time. In production, the size of the discharge port should be adjusted in time according to the nature of the material. Properly increasing the discharge port of the machine can not only improve the production capacity, but also prevent the machine from clogging. The adjustable range is generally between 10mm-300mm.

 

3、Appropriate eccentric shaft speed

 

Under the given working conditions, the production capacity of the jaw crusher increases with the increase of the eccentric shaft speed. When the speed reaches a certain value, the production capacity of the crusher is larger. After that, when the rotating speed increases again, the production capacity drops sharply, and the content of over-crushed products also increases. The specific power consumption does not change much with the increase of the rotating speed before reaching the rated production rate, but after reaching the rated production capacity, the power consumption increases sharply with the increase of the rotating speed. Therefore, the appropriate eccentric shaft speed should be selected to improve productivity and reduce energy consumption.

 

4、Choose accessories for crushing equipment with good wear resistance

 

The better the wear resistance of the crushing parts (hammer head, jaw plate) of the crushing equipment, the greater the crushing capacity. If it is not wear-resistant, it will affect the crushing capacity of the jaw crusher.

 

 

5、Maintenance work of jaw crusher

 

In order to make the jaw crusher work more efficiently, achieve the predetermined production capacity and reduce the loss of accessories, it is not enough to only pay attention to the above, but also to maintain the equipment regularly, especially for the jaw crusher and other vulnerable parts. The maintenance of the equipment can not only reduce the wear and tear of the accessories, prolong the service life of the equipment, but also effectively improve the work efficiency and reduce the production cost.

Related Posts