Minerals

Raw ore: Rock gold

Capacity: 5TPH

Project location: Sudan

Input size: 0-210mm

Output size :0-0.5mm

Main Equipment

Chute feeder

Jaw crusher

Double roll crusher

Wet pan mill

Shaking table

Customer’s requirement

The client has a limited budget and requires an affordable solution

Crushing plant capacity: 5-10TPH

Grinding plant capacity: 3-5TPH

Beneficiation plant capacity: 3-5TPH

Rock needs are milled to 0.5mm below for releasing the gold.

3-5 TPH Hard Rock Gold Mining Plant flow details

1、Feeding & Crushing: Chute feeder

Excavator or loader feed raw ore into raw ore bin. The chute feeder is installed under the raw material bin, which is convenient for feeding raw materials to the jaw crusher.

2、Crushing stage: Jaw crusher, double roll crusher

Here jaw crusher crush 0-210mm big stone to 0-50mm small stone. Output of jaw crusher feed to double roll crusher via belt conveyor. The double roll crusher crush 0-50mm small stone to 0-5mm fine size, then feed to fine ore bin via belt conveyor.

3、Grinding stage: Wet pan mill

Install electromagnetic vibrating feeder under the fine ore bin in order to evenly feed wet pan mill. Wet pan mill grind fine ore to powder size 0.5mm below for releasing gold.

4、Gravity separation: Shaking tables

The output of wet pan mill 0-0.5mm powder materials go to shaking table for recovering fine gold. (shaking table is gravity separator, it’s highly efficient working on separating gold from crushed ore.)